Hologic ThinPrep 5000, Руководство оператора, Страница: 153 / 346

ThinPrep™ 5000 Processor with AutoLoader Operator’s Manual
6.19
6
U
SER
I
NTERFACE
Press the OK button. The Processing Complete screen is displayed (Figure 6-20).
Figure 6-20 Processing Complete Screen
Each batch report can be viewed by pressing the View Report button. At that time the report can be
printed or saved to USB device. Refer to Batch Reports, page 6.68. After viewing each report, this
screen will be displayed. To exit this screen, press the
Done button.
Pause a Batch
Figure 6-21 Pause Button
Note:
The following steps are for operator initiation of a batch pause. The system may initiate a
pause if it detects low inventory of consumable items. The pause allows the operator to reload
slide or filters as required.
A batch may be paused by pressing the
Pause button.
When the Pause button is pressed the system will complete processing the current vial and then
pause.
The display header will change color and read “Interrupting” as the processor puts items away and
parks the mechanisms. Refer to Figure 6-22.
The Paused screen will display when the processing sequence is safely paused.