Faxitron Path Table User Guide
Chapter 3: Installation and Maintenance
MAN-07611 Revision 002
Page 9
3:
Installation and Maintenance
3.1 Table Installation
The Faxitron Path Table system will be unpacked and assembled onsite by a
Hologic authorized representative. Please contact Hologic or your local
representative when your system arrives to arrange for system setup.
3.1.1 Inspecting the Pallet
The Faxitron Path Table arrives on a pallet encased in foam. Have the shipping
agent transport the crate and box to an area where they can be kept safe from
theft, damage, and environmental extremes until the Hologic authorized
representative can install the system.
Check the pallet for any damage. If there is damage, contact Hologic. The pallet
is about 3 feet tall and includes the table and monitor arm only. The system
comes separately.
3.1.2 Positioning the Feet
When the system has been installed, it is important that the feet are secured
down so that the table does not move. Turn the orange wheel to the right until the
casters are off the ground. See Figure 3: Raising And Lowering The Feet.
Figure 3: Raising and Lowering the Feet
Chapter 3
