Driver Installation
Apple Mac OS X 10.6.4 and above comes with a driver, no need to install drivers. Mac OS does
not support DSD Native mode.
Linux OS also has a built-in driver and does not require a driver.
The latest Windows 10 comes with a driver, but since its own driver does not support ASIO and does not
support DSD, you need to install the driver provided by Holo Audio. The driver installation steps are as
follows.
Connect “
青
Cyan
” to the power supply and turn it on. Connect the USB input port to the computer USB
port by using the USB cable, and select the input source as USB. Note that if the input source is not
selected as USB, the computer will not recognize the Cyan DAC USB Device properly.
When
“
青
Cyan
”
is connected to the computer via USB, the Windows system will display a notification
that the new hardware is found, and the driver installation failed. Please ignore the failure notification (see
the figure below).
L
ocate the file named “HoloAudio_v4.35.0_2017
-11-
01_setup.exe” Double click or right click to open/run
the file. (Filename and version may have changed. Please refer to whatever is newest on the products
website)
