KHV
© HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 060405.
6
Coupling
The snow plough is connected to two (2) double acting hy-
draulic functions or one single function and electrical connec-
tion for the selector valve.
Make sure the couplings are free from dust!
Setting
1. The plough is lifted and the attachment bracket is tilted to
about 90° to the ground.
2. Lower the loader arms until the plough contacts the ground
and the hinge is verticle.
3. Now the ground pressure can be set by the tilting function.
Normally the plough shall be operated tilted within its move-
ment area. This is when the ground pressure indicator yellow
markers are in line.
4. Operating with the plough in the middle of the movement
area will give the best ground follow, but temporarily the
ground pressure can be raised or reduced by tilting forwards
(raised) or backwards (reduced).
5. Only the tilting function is to be used for adjusting the
ground pressure. By using the lifting function the plough con-
tact is adjusted (see picture).
6. Check that the plough is moving free in all positions from
the wheel loader wheels.
Connect to the 3:rd
Connect to the 4:th
hydraulic function.
hydraulic function.
Lift or sink to
obtain the right
angling to ground
Tilt to increase or
decrease ground pressure.
Ground pressure indicator
