F E AT U R E S - O P E R AT I O N S
ASSEMBLY INSTRUCTIONS
Assembly Time: 10-15 minutes.
Tools Required: Phillips head screw driver.
NOTE:
MAKE SURE YOU REMOVE ALL CONTENTS FROM
THE PACKAGE. PLEASE CHECK PACKAGING MATERIALS FOR
PARTS THAT COULD BE REQUIRED TO OPERATE YOUR FAN.
LOCATE THE BELOW PARTS FROM THE BOX TO PREPARE
FOR ASSEMBLY:
• Fan housing
• 2 pedestal halves
• 2 base halves
• 8 M4x10mm screws (4 pcs for pedestal assembly
and 4 pcs for base assembly)
• Cord clip with 2 M4x12mm screws (affixed
underneath the base inside the package box)
• Remote Control (placed in a plastic bag inside the
package box)
Follow the steps below in order to assemble the fan
pedestal and base before operating your fan:
1. To assemble the pedestal, simply snap the 2 pedestal
halves together (Fig. 1).
2. Pull the power cord through the assembled pedestal,
making sure the wider end of the pedestal is facing
towards the fan housing (Fig. 2).
3. Align marking “A”, located at the bottom of the fan
housing, with marking “A” on the top end of the
pedestal. Insert the alignment post from the pedestal
into the alignment hole on fan housing for proper
alignment (Fig. 3).
4. Use 4 screws (M4x10mm) provided to attach the
assembled pedestal to the bottom of the fan housing.
Secure the screws with a screwdriver (Fig. 4).
5. Snap the 2 base halves together by sliding the posts
of one base half into the slots of the second base half
(Fig. 5).
Fig. 1
Fig. 2
Fig. 5
A
Fig. 3
Alignment Hole "A"
Alignment Post "A"
Fig. 4
4 screws (M4x10mm)
