FILTER LIFE INDICATOR
The filter indicator light eliminates guesswork letting
you know when it is time to replace the HEPA
BEFORE USE
1.
Aher removing the unit from the box, take the plastic
covering off tfie unit and
dispose of it.
2.
Lay the air purifier flat on its
with the front
I
air intake
pointing up.
3.
Open the
of the air purifier by pressing on the
door release button on the side of the unit and gently
pulling the door forward.
4.
The carbon
which are packed in a plastic
in the box,
be removed from plastic bag
then placed on each of the HEPA filters. The plastic
tabs on the HEPA filter will hold the carbon in place
(see Figure
1 ).
5.
Replace the front grill by aligning it with the unit and
gently pressing it until it is firmly in place.
OPERATING INSTRUOIONS
1.
Select location where air intake grill and filtered air
outlet are not obstructed.
2.
.
Plug into a
120V
AC electrical outlet.
3.
Press the Power Button
( (!)
)
. The unit will turn onto
LOW and the LED light on the outer ring of the LOW
( 1 )
button will illuminate.
time
power on the air cleaner, the
Filter Life
on the outer
of the
Filter Reset Button
( 0)
will blink
times to
test current condition of the filters. If filters are in
good condition, the light will remain green.
As
filters
Figure
1
Carbon filter
get dirty, the light will change first to yellow and then
to red. See Filter Replacement Instructions for more
information.
4.
Select the desired speed setting from HIGH
(3),
MEDIUM
(2)
or LOW
(1)
by pressing the desired
operating speed button on t�e control panel. For
continuous use, it's recommended to operate the air
purifier at the MEDIUM
(2)
setting. For quieter
Figure
2
A.
B.
c.
D.
E.
A
D
E
Power Button
( (!))
Speed Control
Buttons
(1-2-3)
Ionizer Button
(»8)
Filter Reset Button
(0)
Filter Life Indicator
Light
B
G
H
F.
Door Release
Button
G. Filtered Air Outlet
H. True HEPA filters
I.
Carbon filters
J. Air Inlet Grill
