Programming - Time & Memory
8
Setting Up
Note:
Because of the default settings already determined by the manufacturer it may not be necessary for the
majority of users to perform – except the Relative Air Pressure (see further down) - any further basic settings. Changes,
however, can be easily made.
For basic settings, the following menu is started by touching the Touch Screen in the desired display area by touch pen.
The basic settings can now be performed in the following successive order:
Note:
setting procedure can be exited at any time by touching any other function area (except “+”, “-” or “ON/OFF”).
Time
1)
Touch the TIME section, + button and – button will be flashing. Touch the + button or – button to adjust the contrast
level from 0 to 8. (default 5)
2)
Touch the TIME section again, + button and – button will be flashing. Touch the + button or – button to set the time
zone.
Note:
In Europe, 0 for GMT+1 time zone, 1 for GMT+2 time zone, -1 for GMT time zone.
In America, -4 for Atlantic time zone, -5 for Eastern Time zone, -6 for Central Time Zone, -7 for Mountain Time zone, -8
for Pacific time zone, -9 for Alaska time zone, -10 for Hawaii time zone.
3)
Touch the TIME section the third time, + button and – button will be flashing. Touch the + button or – button to Shift
the 12/24 hours format.
4)
Touch the TIME section the fourth time to set the hour, the + and – button will be flashing. Touch the+ button or –
button to change the value.
5)
Touch the TIME section the fifth time to set the Minute, the + and – button will be flashing. Touch the+ button or –
button to change the value.
Memory
1)
Touch Memory section to activate history data toggle display, + button and – button will be flashing. Press – to toggle
forward to see earlier weather history data together time stamp, press + to see later history weather data. When history
data displayed, the corresponding time will be displayed at the time section area( History data saving interval can only
be changed using the PC software that comes with this product, the default history data saving time interval is preset to
30 minutes prior to shipment).
2)
Touch Memory section again will trigger the memory clear procedure: the word of “CLEAR” will be flashing, the full
memory usage icon will be flashing. Press and hold the memory full icon for 3 seconds will clear the memory.
WS109A Manual.indd 10
26/07/13 5:01 PM
