background image

Before you Start

 

Check the pack contents before 
attempting to construct the greenhouse. 
The seedlings in your greenhouse  
will want an outdoor full-sun to part-sun 
position all year round, depending on the 
climate of your location. This greenhouse 
is easy to move (when empty) due to its 
light weight, so moving it seasonally as  
the weather changes is easily done.

Assembly

 

Assemble as shown on opposite page - 
start with the base and work upwards. 
Tools are not required - hand assembly is 
suitable. We suggest wearing protective 
gloves when assembling the greenhouse. 
When fitting the cover, ensure the frame is 
tightly pushed together and the door is 
unzipped prior to sliding over the frame. 
Failure to do so may cause damage to the 
cover. Secure the cover to the frame with 
the ties attached to the inside of the cover. 

Misting System Connection

 

Connect up the black poly pipe using  
the elbow and joiners to fit around the 

indicated area of the frame (dashed line  
on opposite page). 
Trim the last piece of poly pipe to the 
height of the Greenhouse and place the 
supplied end cap onto one end of the poly 
pipe and the snap on connector to the 
other end. Attach a hose to the snap-on 
connector.
Attach the poly pipe along the width of the 
top most horizontal pole and adjoining 
vertical poles with supplied clips, which 
slot into each other.
To insert the sprayers, punch 6 holes along 
the poly pipe as indicated on the opposite 
page. Twist in the drippers with the yellow 
end inside the poly pipe.

Care and Maintenance

 

Avoid very windy positions and spots 
where the frame may stand in water  
for long periods. Wash off heavy dirt  
or dust deposits and remove bird 
droppings with soapy water. The  
cover may be removed from the  
whole structure, disassembled and  
stored when not in use.

2x 13mm x 700mm poly pipe

4x 13mm x 600mm poly pipe

1x 13mm compression snap-on coupling

2x 13mm compression joiners

3x 13mm compression elbows

2x 13mm compression end caps

6x 4mm punch

6x 4mm barbed misting spray jets

12 x 15mm frame connection clips

 A

 I

 C

 E

 B

 D

 F

 G

 H

Misting kit placement

 G

 F

 C

 H

 I

 E

 D

 A

 B

Misting system fittings

Greenhouse parts and fittings

Отзывы: