10
11
Cycle Watering Schedule
1. Select the zone.
2. Select
Cycle.
3. Select the day(s) you require.
4. Select your
Start Time.
5. Select your
Stop Time.
6. Select your
Run Time.
7. Select your
Delay Time.
Syncing Start Times
If you need to schedule multiple zones to water throughout the day, you can sync your zone start times to
run sequentially via the app.
1.
Select the first zone.
2. Select the scheduling option that best suits
your watering needs. In this example we are
using
7 Days.
3. Select the day(s) you require.
4. Select your
Start Time.
You have the option to schedule three start times.
5. Select your
Run Time.
STEP 1
EXAMPLE
Zone 5 will water on Tuesdays, Thursdays and Saturdays. It will start the
cycle at 7am and finish at 7pm. During this time your watering will run for
2 minutes every 2 hours. This watering schedule option is great for misting
greenhouses that require regular watering throughout the day.
1. Select the next zone you want to schedule.
2. Toggle
Start Time button
to
on.
Do not select a
start time. The start time will automatically sync
at the end of Step 3.
3. Select a
Run Time.
Repeat this step for all other required zones.
STEP 2
1.
Select the first zone.
2. Select the
Sync button.
The start times for all
consecutive zones will now be populated.
STEP 3
Saving Your Schedule
When you have set the watering schedule via the app, you will need to save the schedule and update the
controller to reflect the schedule settings.
Your schedule is saved.
STEP 1
Set your schedule and
press
Done.
STEP 2
Ensure the corresponding
controller is selected and
press
Update.
EXAMPLE
Zones 1-2 will water on Tuesdays, Thursdays and
Saturdays once a day. Zone 1 will start watering
at 7am and water for 15 minutes. Zone 2 will
automatically start watering when Zone 1 watering
is complete – at 7.15am for 15 minutes.
Using the Cycle feature can drain battery life when the run and delay times are set at a high frequency.
This should be taken into account when setting watering times. The Run and Delay times need to be set
to at least 5 seconds when using Cycle scheduling.
