Auto Rewind Hose Reel Installation
The Auto Rewind Hose Reel should be
installed nearest to your chosen water
source for convenience of use. Check
the tap to reel hose can reach the tap
prior to mounting the hose reel.
Take the coated mounting bracket and
place against either a wall or wooden post.
Mark the position of where you would like
the screws to be placed through the centre
of the bracket holes to prepare for drilling.
1
2
3
1
2
Auto Rewind Hose Reel - Instruction Manual
Take the wall plugs (supplied with the hose
reel) and measure the correct drill bit width
to use.
3
It is recommended that you drill slightly undersize
as all materials have different properties and this will
ensure the wall plugs have a secure fit. Please note
that if you are attaching your hose reel to a wooden
post, you will not require the wall plugs as the coach
bolts screw directly into wood.
As a guide only, the wall plugs for the 10m hose reel
are 7.7mm in diameter, suitable to hammer into a
8mm drilled hole, and the 20m/25m/30m wall plugs
are 11.7mm, suitable to hammer into an 12mm hole.
It is very important to use the correct size drill bit,
so a very secure fit of the wall bracket is made before
installing the Auto Rewind Hose Reel.
When ready drill all four holes, then hammer the wall
plugs gently into your wall. (if attaching to a wall).
1125H Auto Rewind Hose Reel A4 Manual_TS Guide.indd 4
29/07/2015 11:55 am
