Hollywood Racks Trike Adapter 2, Инструкция по сборке и установке, Страница: 2 / 8

2
Trike Adapter:
Assembly for carrying one trike
TRIKE ADAPTER PARTS LIST
Item Description Qty
TA-1 straight tube 1
TA-2 long connector 1
TA-3 medium connector 1
TA-4 short connector 2
TA-5 universal connector 1
TA-6 cross connector 1
TA-7 front main bracket 1
TA-8 left side wheel holder 1
TA-9 small wheel adapter 1
TA-10 safety flag 1
TA-11 tie down straps 2
A) Assembly: Install rack on vehicle without wheel holders, center mast must be folded down.
1. Install item E left side wheel holder onto driver’s side wheel tube.
2. Remove front reflector cap and install front main bracket TA-7 . Do not tighten set screw on bottom yet.
3. Slide long connector TA-2 onto passenger side wheel tube.
4. Install universal connector onto long connector TA-2 . (Please note it may have to be reverse later
depending on the width between the trikes wheels.)
5. Install cross connector TA-6 (empty hole on bottom) onto long connector TA-2
6. Install straight tube TA-1 between front main bracket and cross connector.
7. Install short connector TA-4 onto long connector.
Note: when carrying one three wheeler only, the medium connector TA-2 and one of the short
connectors TA-4) will not be required.