2: Install Wheel Holders:
Rotate and remove L pins from holes
A
. Rotate wheel
tubes to a horizontal position, then replace L pins into
holes
B
as indicated.
Slide wheel Holders
E
and
F
onto wheel tubes as
indicated.
Fig. 2e
Item P
Fig. 2d
3. Small Wheel Adapter
For bikes with 16” wheels, use the “small wheel”
S
adapter to prevent the wheel from falling through the
wheel holder. Place the upper section on top of the
wheel holder, then position the bottom section directly
below it. Insert the bolts and lightly tighten using the
included 5mm hex wrench
T
. Slide the wheel adapter to
the desired position then tighten all 4 bolts securely.
Fig. 2c
Fig. 3
Fig. 2a
After installing wheel holders, install the “stop”
screws (item P) into the bottom of the wheel
tubes as indicated in Figure 2d & 2e. Use
Phillips screwdriver.
3
