Hollywood Racks HR150 Скачать руководство пользователя страница 2

Limited One Year Warranty:

This rack is warranted for a period of one year against defects in materials and 

workmanship, effective from the date of purchase to the original purchaser. The manufacturer will repair or replace any 
defective parts due to materials or workmanship. The manufacturer of this product shall not extend the warranty to 1) Any 
failure or malfunction of the product due to any modification to the product; or 2.) Damages not attributable to a defect in 
materials or workmanship; or 3.) Damages resulting from improper installation on the vehicle or attachment of bicycles on 
rack. 

Consequential or Incidental Damages:

The manufacturer shall not be liable for any consequential or incidental 

damages in connection with the purchase, use or handling of this bike rack. 

Purchaser’s Rights: 

Some states do not 

allow the exclusion or limitation of consequential or incidental damages and the above limitation may not apply to you. This 
warranty gives you specific legal rights and you have other rights, which vary from state to state.

Hollywood Racks  12812 S. Spring Street  Los Angeles, CA 90061  Made in Taiwan

www.hollywoodracks.com Tel.310-516-8600  FAX 310-516-8955  Email: [email protected]

5. Attach side straps to trunk/boot lid

Pull strap end through buckle to tighten.  
(Fig. 5)

Installing the bicycles on the rack:    

Place the heaviest bike onto the rack first
(closest to the vehicle), putting the bikes 
top tube into the rubber bike cradles.

Pull the rubber strap across the bike

’s 

frame tube and attaché it to the cradle.
Repeat for the other cradle.

Repeat for second bike, but with the 
handlebars on the opposite side

After both bikes are mounted to the rack,
use the nylon webbing tie down strap to 
secure the bikes to the rear frame of the 
rack itself.

Removing the rack from the vehicle:

Press on the spring buckles to loosen the 
side straps.

Loosen the knob on the safety ring and let 
the ring disengage from the latch

Remove pin from center handle, then 
carefully squeeze and lift up on handle to 
release rack from tow ball.

Fig. 5

Отзывы: