Connect the DB25 interface of the TALLY converter with the switcher by a
corresponding TALLY cable. Connect the USB interface of the converter with a
wireless HD video transmission system or a wireless intercom system, and connect
TALLY lights to wireless terminal equipment, and then enable TALLY signal
universal converter to be on operating state by pushing the electrical level switch.
The TALLY signal universal converter uses the red indicator light for PGM, and the
green indicator light to indicate for PVM. In this way,the TALLY system can
correctly indicate which device is playing and which device is preparing according
to the TALLY signal from the switcher.
3
STANDARD SETUP
USB
TALLY
USB