Quick Start Guide
Install Headset Battery
Turn On Headset
Note: The indicator light stops flashing and turns to
static green when the HUB Base and the
Remote Headset(s) are successfully connected.
Mute/Unmute Microphone
Mute/Unmute the headset’s microphone by moving the mic boom up/down.
1.Move the mic boom up to the MUTE position that makes a
CLICK sound, and the HUB Base’s interface displays "MUTE"
corresponding to the headset status.
2.Move the mic boom down to the TALK position that makes a
CLICK sound, and the HUB Base’s interface displays "TALK"
corresponding to the headset status.
TALK
MUTE
St
op
-p
oi
nt
Sto
p-
po
int
The device is now ready for use.
MUTE
TALK
6
Step 1: Slide the battery compartment
cover lock
Step 2: Open the cover
Step 3: Place the batteries into the compartment
and close the battery cover
Nameplate
Power Switch
Power up the Headset
