9
4. Operation instruction
Getting started
After finishing all steps above, system is workable, follow below steps.
a)
Ensure the video source and the display terminal are powered on.
b)
Ensure all input, output cables are connected.
c)
Insert TX or RX power adapters into power plug bases.
d)
Green power indicator will light.
e)
It takes about 2~3 seconds to finish EDID and other initialization
automatically.
f)
Transmitter video indicator will light; it means input video signal is
OK. Then receiver video indicator will light, it means output video
signal is OK.
g)
At this time, display terminal will show the same format video that
video source send out.
Remote IR function
Using video source’s (such as Blue-ray DVD) IR controller faces extender
RX side IR receiver. IR signal will be transmitted to extender TX side IR
output port, to control video source directly. Similarly, using display
terminal’s (such as TV, projector) IR controller faces extender TX side IR