NOTE: NO DRILLED HOLE OR PLASTIC ANCHOR
REQUIRED WHEN MOUNTING TO WOOD WALL.USE
SCREW ONLY. WE DO NOT SUPPLY HARDWARE FOR
MOUNTING ON CONCRETE WALLS.
Figure 5
Step 7:
Find a desired location. Mark 4
locations for screws on wall
One screw (for each unit) must be
attached directly into a wall stud. Wall
anchor is not needed when mounting
to wall stud.
Drill one of the marking 3/16" hole (for
each unit).
Insert plastic anchors (5) into the hole
on wall as shown. (When doing this,
you will need a hammer help you).
Using the Phillips head screwdriver,
install screw (4) into the anchor (5).
Turn the screw (4) until there is a gap
of approximately 3mm between the
head of the screw and the wall as
shown.
Figure 6
Step 8:
Hang the ANYWAY SHELF onto the
screw (4) and verify the ANYWAY
SHELF is resting securely on the
mounting screw (4).
Step 9
Place level (6) on top shelf to insure
product is level.
Now your ANYWAY SHELF is ready
to use.
Each shelf support up to 9 lbs
Page 5
(5)
(4)
