A (3), C (3), D (3)
Figure 3
A (3), B (1), C (4), D (4), F (1), G (3)
Figure 4
Attach Left Inside Leg (7) to
assembled unit by inserting Big Bolts
(A), Lock Washers (C), and Flat
Washers (D) through corresponding
holes on Left Inside Leg (7) and into
Barrel Nuts (G) in Upper Shelf Panel
(3), Lower Shelf Panel (4), and Back
Lower Brace (5).
Tighten Big Bolts (A) with Allen
Wrench (E).
Do not fully tighten bolts until
assembly is complete.
Turn assembled unit on its side as
shown on illustration.
First, attach Right Outside Leg (9) to
Right Inside Leg (8) by inserting Small
Bolt (B), Lock Washer (C), and Flat
Washer (D) through middle hole in
Right Outside Leg (9) and into
threaded insert in Right Inside Leg (8).
Tighten with Allen Wrench (E).
Second, insert Barrel Nuts (G) into
corresponding holes on Cup Rack (2).
Attach Cup Rack (2) to assembled unit
by attaching short end of Cup Rack (2)
to Right Inside Leg (8) and long end to
Right Outside Leg (9) using Big Bolts
(A), Lock Washers (C), and Flat
Washers (D).
Insert Wood Dowel (F) and Barrel Nut
(G) into corresponding holes on Front
Lower Brace (6). Attach Front Lower
Brace (6) to Right Outside Leg (9) by
inserting attached Wood Dowel (F)
and using Big Bolt (A), Lock Washer
(C), and Flat Washer (D).
8
