hollu PM 150, Использование и обслуживание, Страница: 23 / 44

ENGLISH
- 3
1.1 TECHNICAL
CHARACTERISTICS
PM 150
Voltage 220 - 240 V
Frequency 50Hz
Motor power 1300W
Working width 505 mm - 20 inch.
Rotation speed 1500 rpm
Weight without
accessories
44 Kg
Electrical cable
length
15 m
Sound level < 70 db(A)
Vibration level < 2.5
Working pressure 0÷5 Kg (adjustable)
Transmission type direct
Maximum dimen-
sions
1130x790x330H mm
Minimum dimen-
sions
855x790x485H mm
1.2 INTRODUCTION
DANGER:
Before using the appliance, read the accom-
panying
“SINGLE DISC SAFETY WARN-
INGS” booklet carefully.
This manual forms an integral part of the ma-
chine itself. It must therefore be kept in a safe
place where it is accessible to all users (opera-
tors and maintenance personnel) throughout
the life of the machine until it is scrapped.
1.3 - INTENDED USE OF
THE MACHINE
WARNING:
This machine is for indoor use only.
DANGER:
Any other use releases the manufacturer
from liability for harm to persons and/or
property and invalidates any warranty
condition.
This machine is intended for commercial use,
for example in hotels, schools, hospitals, fac-
tories, shops, offices and rental businesses.
The machine has been designed and built:
for polishing floors that have been cleaned
and vacuumed beforehand (i.e. parquet,
marble, ceramic, linoleum etc.).
1.4 - NON-INTENDED USE
OF THE MACHINE
WARNING:
The machine is not intended for outdoor
use.
DANGER:
- do not polish uneven floors;
- do not use on cement floors;
- do not use on dirty floors;
- do not use diesel/petrol or corrosive de-
tergents to polish floors;
- do not polish if corrosive, flammable and/
or explosive liquids, even if diluted, are
present.
2.1 UNPACKING
(Figs. 1-2)
Upon delivery of the machine, remove its ex-
ternal packaging and cut the straps (1) (Fig.
1) and lift up the handle (2) by pulling on the
release handle (3) (Fig. 2).
Manuale HU30-925_HOLLU_PM150_1ed_07-2019.indd 3 16/07/2019 08:30:53