The current draw is extremely low (25 micro-
amp) and will have virtually zero impact on a car battery’s charge. Hot start wire
should be connected directly to b12voltage and should remain powered 100% of the time.
MAIN SPEEDOMETER FEATURES:
Setting LED brightness both day and night
1.
With gauge power on, press and release LED button (LED will light up at current brightness setting).
2.
Press and release LED button to change LED to desired brightness setting. NOTE: 5 Settings options - off, 1, 2, 3, 4 (4 is the
brightest.)
3.
Do not press the button for three seconds to save the brightness setting. The LED will blink to indicate that setting has been saved.
NOTE:
Setting the brightness setting when the gauge lighting is on, will set the night-time brightness setting. Setting the level when
the gauge lighting is off will set the daytime brightness setting.
