XL-TG10157BM-en-US Rev
A · 2013-01-03 ·
Amendments and errors reserved · © SAF-HOLLAND
, Inc.
SAF-HOLLAND USA, Inc. · 888.396.6501 · Fax 800.356.3929
SAF-HOLLAND Canada Limited · 519.537.3494 · Fax 800.565.7753
Western Canada · 604.574.7491 · Fax 604.574.0244
SAF-HOLLAND Mexico · 52.55.5362.8743 · Fax 52.55.5362.8743
www.safholland.us
Figure 8
Figure 7
Figure 6
Installation
5. Weld the curbside mounting bracket as illustrated
(Figures 6, 7 and 8.)
NOTE:
When welding is required, ensure that the battery
ground cable is disconnected and that all electrical
equipment is completely isolated before welding
is initiated.
Failure to isolate electrical equipment
from ground prior to welding could result
in overload which, if not avoided, could
result in property damage.
6. Repeat Steps 2 through 4 for the roadside mounting bracket.
7. Refer to the Installation Manual XL-TG10153BM-en-US
for the remainder of the Liftgate Installation.
BOTTOM FACE OF
CROSSMEMBER
3-7.5
TOP FACE OF
CROSSMEMBER
SLIDE RAIL
MOUNTING BRACKET
SLIDE RAIL
1/4
"
MOUNTING BRACKET
1/4
"
ALL HOLES
MOUNTING BRACKET
1/4
"
1/4
"
