HL-140 E12 / HL-160 E12 / HL-190 E12 / HL-220 E12
N-120EL12 / N-140EL12 / N-165EL12 / N-195EL12
Rev. F
8/2/18
Page 54
11
EC Declaration
This EC Declaration applies to scissor lifts produced after 29 January 2015.
EC DECLARATION OF CONFORMITY
(In accordance with the Machinery Directive 2006/42/EC, annex II, sub a.)
HOLLAND LIFT INTERNATIONAL B.V.
ANODEWEG 1
1627 LJ, HOORN, THE NETHERLANDS
Declares that:
Scissor lift, series N
Type: HL-140 E12 / HL-160 E12 / HL-190 E12 / HL-220 E12
N-120EL12 / N-140EL12 / N-165EL12 / N-195EL12
Machine number: HL140.... / HL160.... / HL190.... / HL220....
N120.... / N140.... / N165.... / N195....
Complies with the stipulations of the Machinery Directive;
2006/42/EC
Conforms to the following additional European Directives:
EMC Directive, 2004/108/EC
Low Voltage Directive, 2006/95/EC
Conforms to the following harmonised European standards:
EN 280:2001+A2:2009, EN-ISO 12100-1:2003, EN-ISO 12100:2010,
EN 349:1+A1:2008, EN-ISO 13850:2008, EN-IEC 60204-1:2006+A1:2009,
EN-IEC 60529:1 1992+A1:2000, EN-IEC 60947-5-1-2004
Conformity with the requirements laid out in annex I, IV and VII of the Machinery Directive was
established during an EC type examination conducted by S.G.S NEDERLAND B.V. (Identity
Number: 0608), Malledijk 18, Spijkenisse (The Netherlands). An EC Type examination certificate
was issued with the number:
110201/500/001/2835.
HOORN, ......
..........
Managing Director
Holland Lift International B.V.
Anodeweg 1
PO Box 2321
1620 EH HOORN (THE NETHERLANDS)
Telephone
: **-31-(0)229-285555
Website
: www.hollandlift.com
