5
Lowes.com
2
5. Remove the protective cap from tree bottom section (1)
and insert tree middle section 1 (2).
5
6. Release all branches using the same procedures
described in step 4.
6
7. Add tree middle section 2 (3), tree middle section 3 (4) and tree
top (5) using the same procedures described in steps 5 and 6.
7
8. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that
all wires are free of branch hinges.
9. Insert green label plug into the wall outlet. The entire tree should now be lit. If some bulbs do not
light or flicker, search for any loose plugs and/or broken, loose or missing bulbs. Connect the
plugs or replace the bad bulbs promptly in order to maintain the performance and life expectancy
of your pre-lit tree.
10. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest
from the pole and fan out one to the right, one to the left and one at the center of the main stem.
11. After shaping the entire tree, slightly upsweep all branch tips for a uniform
look. Shift branches to fill any gaps. The tree is now complete and ready to be decorated.
