background image

5

CARE AND MAINTENANCE

Grip plastic

not glass

Pull straight out

Remove lamp base

Replace lamp base

Burned fuse

1. Grasp plug and remove from the receptacle or other outlet device.

    Do not unplug by pulling on cord.

    out of lamp holder.

FUSE REPLACEMENT INSTRUCTIONS:

BULB REPLACEMENT INSTRUCTIONS:

FUSED LAMP REPLACEMENT

WARNING -

 Risk of fire: This product employs overload protection (fuse lamp) in 

each series light circuit to provide overload protection in addition to the fuse(s) 
located in the plug. Do not replace the fuse lamp contained in this set with any 
other type of lamp, use only spare fuse lamps provided with this product. In case 
of a burnt out FUSED lamp, the entire series of 50 lamps will be out. To replace 
the fused lamp:

5. 

 Shape and shift tree branches to fill in any gaps.

     Plug in the power cord (5) to any 120V outlet. Press the pedal 

     switch (6) to turn on the tree lights.

5

6

5

•  Unplug extension cord from the wall outlet first and then remove all ornaments and decorations.
•  Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to

   remove from section below and fold all branches toward the pole.
•  Continue by gently lifting straight up each section(s) from the section below 

   and fold all branches toward the pole until the bottom section is removed from 

   the tree stand. Cover the protective cap on the poles to avoid damaging the 

   internal parts. 

(See Fig. A)

•  Carefully place all tree sections into shipping box and tape it shut.
•  When not in use, please store your tree in a cool, dry place away from sunlight. 

   Exposing your tree to excessive heat or humidity may damage your tree.

Fig. A

Lowes.com

1. Grasp plug and remove from the receptacle or other outlet device.

    Do not unplug by pulling on cord.
2. Open fuse cover by sliding open the fuse access cover on top of

    attachment plug towad blades.
3. Remove fuse carefully: turn fuse holder over, remove fuse.
4. Risk of fire. Replace fuse only with 3-amp, 125-volt fuse for decorative    

    lighting string(provided with product). If applicable, replace fuse only 

    with 5-amp, 7-amp or 10-amp, 125-volt fuse for cord-set (see fuse 

    current on cord-set plug). 
5. Close fuse cover by sliding closed the fuse access cover on top of

    attachment plug.

Отзывы: