4
ASSEMBLY INSTRUCTIONS
4
1
2
3
4
1. Place all the parts flat on the floor.
Insert the two metal rods of each leg (B) into the
corresponding holes at the bottom of the body
(A).
Insert the metal hook at the lower part of the left
front leg into the corresponding hole on the right
front leg to secure them in position.
Repeat this step for the left and right hind legs.
2. Fasten each leg (B) to the body using the plastic
ties (AA) provided.
Attach the pair of metal hooks of the head and
neck (C) to the body. Rest the metal rod on each
side of the head and neck onto the inside of the
body (A) to secure its position.
3. Insert the metal rod of each ear (E) into the
corresponding hole on top of the head.
Insert the metal rod of the tail (F) into the
corresponding hole at the rear end of the body.
4. Insert the metal rod of each antler (D) into the
corresponding holes on top of the head.
Wrap the decorative collar with bow (G) around
the neck. Secure the two ends of the collar
using the hook and loop connectors on the
collar.
Secure the figure to the ground using the
ground stakes (BB) provided. Plug into a
properly grounded receptacle.
Hardware Used
Plastic Tie
x 4
Hardware Used
Ground Stake x4
