4
ASSEMBLY INSTRUCTIONS
1. Place all the parts flat on the floor.
Insert the metal rod on one half of bottom cactus (A) into
the corresponding hole on the other half of bottom cactus.
Insert the metal rod on one half of top cactus (B) into the
corresponding hole on the other half of top cactus.
Insert the two metal rods at the bottom of the top cactus
(B) into the corresponding holes on top of the bottom
cactus (A).
Insert the metal rod on one half of the hat (D) into the
corresponding hole on the other half of the hat.
2. Secure the two halves of the bottom cactus together using
the plastic ties (AA) provided. Repeat this step for the top
cactus (B)
Insert a plastic tie (AA) through each pair of matching rings
on the hat (D) and fasten them together.
Insert two metal rods of the hat (D) into the corresponding
holes on top of the cactus (B)
3. Insert the two metal rods of each branch (C) into the
corresponding holes on each side of the cactus.
Secure each branch to the cactus using the plastic
ties (AA) provided
4. Carefully wrap the C9 light set (E) onto the cactus.
Secure the figure to the floor using the ground stakes
(BB) provided.
Plug into a properly grounded receptacle.
4
1
2
3
4
Hardware Used
Plastic Tie x 8
Hardware Used
Plastic Tie x 2
Hardware Used
Plastic tie x 4
Ground Stake x4
