4
4. Secure the end cap over the end of the new tube light section.
INSTALLATION OF THE FLEXIBLE LIGHT
1. Fix mounting clips with screws on to wooden surfaces and snap rope light into place.
2. Mounting clips should be evenly spaced and be a maximum of 3 ft. (0.91m) apart.
3. Make sure that the distance between two lines of rope light is at least 1/2 in. (12mm).
CARE AND MAINTENANCE
CAUTION:
Always unplug the power cord from the power source before connecting or disconnecting any of the tube light
sections.
Do not connect more than 201 feet of tube light sections.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
The product does not light.
1. The fuse may have burned out.
1. Replace the fuse.
