7
OPERATING INSTRUCTIONS
CARE AND MAINTENANCE INSTRUCTIONS
TROUBLESHOOTING
NOTE:
Once fan is unplugged and stops blowing, the inflatable will deflate.
• To deflate, unplug fan. For faster deflation, unzip zipper after unplugging fan. Do not unplug by
pulling on the cord.
• The inflatable is weighted at the base with a sealed weight-bag. Adjust weight-bag to position the
inflatable as desired.
• This power unit is intended to be correctly orientated in a vertical or floor mount position.
• Output: 12.0V
1500mA
• Before using and reusing, inspect the product carefully. Discard any product that has cut, damaged
or frayed wire insulation cords, cracked lamp holders or enclosures, loose connections, or exposed
copper wire.
• When storing the product, carefully remove it from wherever it is placed, including trees, branches,
or bushes, to avoid any undue strain or stress on the product conductors, connections and wires.
• When not in use, store neatly in a cool, dry location protected from sunlight.
The inflatable has LEDs that are designed to operate longer than traditional bulbs. These LEDs are
not replaceable.
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
The inflatable is
not inflating.
1. The power source is disabled
or the cord may be unplugged.
2. Debris may be lodged in the
motor.
3. The zipper may not be securely
fastened, sealing the inflatable.
1. Check all power cables to make sure that
they are properly connected to a power
source. Ensure that the power outlet or
extension cord has power.
2.
Remove the blockage from the fan's air intake.
3. Make sure the zipper is zipped closed.
- +
