PRO 132T
This document is protected by copyrights.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
3
1. GENERAL INFORMATION
1.1. Application
The HMSPECIAL140
is a drilling machine designed to drill holes with diameters of
up
to 1
4
0mm
by using annular cutters. The machine can also drill holes with diameters
of up to 47
mm
by using twist drill bits.
The machine can change the direction of r
otat
ion. This allows thread cutting by
using a tap chuck.
The electromagnetic base clamps the machine to ferromagnetic surfaces. This
makes sure that the operator is safe and the machine works correctly. A safety strap
protects the machine from falling in
cas
e of a clamping loss.
1.2. Technical data
Voltage
1~ 220–
240 V, 50
–
60 Hz
1~ 110–120 V, 50–
60 Hz
Power
2300 W
Spindle shank
MT4
Tool holder
19 mm (3/4″) Weldon
Maximum drilling diameter with an annular cutter
1
4
0mm
Maximum drilling diameter with a twist drill bit
47
mm
Maximum drilling depth with an annular cutter
110mm
Maximum tap size
M42 (1
-
5/8″)
Clamping
force
(surface with the thickness of 25 mm and roughness
R
a
= 1.25)
25,000 N
Electromagnetic base dimensions
105 mm × 315 mm × 50 mm
4.1″ × 12.4″ × 2″
Stroke
260 mm (10.2″)
Rotational speed under load
55–
85
rpm
100–150 rpm
200–300 rpm
350–520 rpm
Minimum workpiece thickness
10
mm (0.4″)
Protection class
I
Noise level
More than 85 dB
Required ambient temperature
0–
40°C (32
–
104°F)
Weight
31 kg (68 lbs)
*
If more than 60 mm (2.36″), use an MT4 arbor with 32 mm Weldon tool holder (UCW
-
583
-13-00-00-
0).
