Holdoor
19
4.4 PTZ
Click the “PTZ SETTINGS” , appears below interface:
[Indicate light] Setting the LED to the state of turned on or off;
[Ban Preset] The preset function failure when enabled;
[Starts at the preset] 1~16 preset options, aligning the corresponding preset position when
startup the device; In forbidden state, the device to keep the power off before position after
startup.
[PTZ Speed] Adjust the PTZ speed;
[Number of Cruises] Set the number of cruises when start up vertical and horizontal, and it will
stop at ten minutes once you select “unlimited”;
Note: The PTZ is for the camera with ‘’PAN, TITL, ZOOM’’, if the camera have no PTZ, this setting is
invalid.
4.5 USER & DEVICE
4.5.1 Multi-Device
1.Click the “multi-channel Device Settings”, and Click “Refresh” to appears below interface, it can
set up to increase max 9-channel:
