HOKLARTHERM teahouse, Инструкция по сборке

Страница: 23 / 109

phase 5: assembly doors
If the side elements are ready so far, you can start with the assembly of
the doors (page ?? - ??). After glazing the teahouse you will need the
doors.
phase 6: assembly windows
The process of the assembly of the window (page ?? - ??) is similar to
the door. The windows also will be needed after glazing the roof.
phase 7: assembly the dome
Assemble the components as described like on page ?? – ??. Build the dome to-
gether completely because the installation at a later stage is very difficult.
phase 8: assembly of the roof elements
The dome must be held so that you can attach the four middle grills. Do
so as described on the pages ?? - ??. After assembling the roof grills
you can start glazing the side area and then you can start glazing the
roof. This will give you the needed stability.
phase 9: glazing of the teahouse
Only now, you can start the glazing on the side elements. For this look
at page ?? - ?? and page ?? - ??. The GHD-gaskets are pulled into the
appropriate grooves of the profile.
phase 0: insert the doors and windows
The doors and windows ca now be inserted, aligned and glazed. Pay
attention to the pages ?? - ??.
phase : completion of the teahouse
Finally, the door holder, downpipes, sash locks, drain blend angles out-
side and the remaining gaskets get assembled.
Follow the pages ?? - ??.
Now your teahouse is completed. Lots of fun and joy with the teahouse.
3
The assembly steps are built up sequentially.
Before you start a new step, the previous step
has to be fully completed.