- 8 -
TIMER SETTING
1.
Press EDIT button. You will enter Programmed Time Setting Function: the Weekly Timer
foresees
8 Periods for Programmed Time Setting.
2.
First Programmed Time Period:
please select the Week’s Day by pressing ADD or REDUCE
button.
3.
Press CONFIRM button. The Week’s Day is set, and you will enter the next parameter:
in sequence, the Period will flash, followed by the Hour for Start and the Hour of Stop, the
Operation Mode, the Fan Speed and the set Temperature.
At each parameter, press ADD / REDUCE buttons to make the desired selections, and press
CONFIRM button to complete setting of each parameter.
Please repeat the procedure till ending the
8 Periods of Programmed Time Setting.
Timer setting
MODE
ADD
REDUCE
QUERY
FAN
DATE
WEEKLY TIMER RESET
LOCK
TIME
CONFIRM
CANCEL
EDIT
WEEKLY SCHEDULE CONTROLLER
3
1
2
Warning!
Before setting the Timer, please correctly set current date (by pressing DATE, ADD / REDUCE
and CONFIRM buttons) and current hour (by pressing TIME, ADD / REDUCE e CONFIRM
buttons).
To exit TIMER setting
: press CANCEL button.
To cancel TIMER settings
: press RESET button.
Note:
after pressing RESET button, “°C” icon corresponding to Temperature flashes
(temperature expressed in Centigrade). If you press ADD button, temperature is expressed
Fahrenheit degree (“°F” icon). Press ADD button again to go back to °C.
Confirm your desired selection by pressing CONFIRM button.
