5
Rotation on font,Bar code 0°, 90°, 180°, 270°
Command
TSPL-EZ,EPL,ZPL,DPL emulation
Printer connection
Connect the power cable
■ Make sure the printer power switch is off;
■ Connect well the power adapter and the power cable,Then let one of its side match the printer port,
and other side connect with the socket, and then turn on the power switch;
Connect USB cable
①
Confirm that the printer's power switch is off;
②
Connect the USB data cable into the related interface;
③
Connect the other side of the USB data cable to the host computer.
note:
Do not plug or unplug the USB data cable with power on.
Get Printer information
We can get the printer information by the self-test page printed through following steps:
①
Turn off the printer.
②
Make sure the printer has loaded paper, and close the printer cover.
③
Press the FEED button, and turn on the printer,
keep pressing the Feed button until you see the
ONLINE and ERROR indicators both flash, ONLINE indicator flash alone, and ONLINE and ERROR
indicators both flash again, then release the FEED button. At this time, the printer will first calibrate the
paper by coming out some blank label and then print out the self-test page as shown.
The self-test page is shown below:
Содержание HOP-HL80
Страница 1: ...Fast Installation Guide HOP HL80 Thermal Barcode Printer...
Страница 2: ...1 Appearance and components Picture 1 Picture 2...
Страница 3: ...2 Picture 3 Picture 4...
