Calibration
1. The pitch angle is not level with the horizontal surface.
2. The roll angle is not parallel to the horizontal surface.
3. The pan axis drifts when the gimbal is on all lock mode.
Method 1: Off-line Calibration
(1) Power on the gimbal, long press the mode button over 6 seconds till the
mode light on.
(2) Laying the gimbal on a static flat surface without any vibrate. Calibration
is completed once the mode light flash twice.
Method 2: 6-Side Calibration Via App
Please make sure the gimbal is connected with app via bluetooth
successfully, then enter "Calibration" and follow the instruction in the app
to calibrate the gimbal.
* If the off-line calibrationis not useful, please refer to [ Method 2]
10
Calibration Instruction
It requires to calibrate the gimbal if you notice
it is not work properly as below.
