background image

Thank you for choosing the Hogtunes REV 225-RM Amplifier for 2014+  

Rushmore Platform Bikes. Since positive word of mouth is the best way to grow 

our business, we want your new system to work as well as it was designed to. 

If you have any questions or concerns, we are here to help. 

 

To help protect your bike’s electrical system and battery, the amp has a built 

in feature where it will turn itself off if it sees less than 10.5 volts, whether 

the bike is running or not. If you’re listening to your stereo while not riding, 

this feature can help protect your battery so the bike can still start. If you’re 

riding and the amp shuts off, this could be showing a potential issue with your 

charging system. If this feature is activated and the amp shuts off, it will turn 

the amp back on again if the voltage exceeds the 10.5 volt threshold. 

REV 225-RM is rated for 112.5 watts per channel @ 2 ohms. Although this 

amplifier makes its highest power with 2 ohm speakers, if Hogtunes 5.75 

ohm speakers or 4 ohm car speakers are used there will still be a noticeable 

improvement in volume and sound quality. 

There are 3 main sections of this manual to help with your installation: 

    1) installation in street Glide models 

2) installation in road Glide models 

3) addinG a second rev 225-rm to the bike

2

Hogtunes Contact Information

 

Email: [email protected] 

Telephone (USA) 608-554-7631 • (Canada) 705-719-6361

The REV 225-RM amplifier is a Class D design. It should be  

understood that ALL Class D amplifiers,  REgARDLEss of bRAnD, cause  

a reduction in fM reception. The REV 225-RM features a proprietary 

circuit  design called R.E.M.I.T. (Reduced Electro Magnetic Interference 

Technology) that Hogtunes believes gives  the bEsT fM reception  

available for any Class D Amplifier designed for a motorcycle. 

If you add a 2nd or  3rd model amplifier to your system, reduction  

of fM reception is increased and is considered normal.

Hogtunes understands that some riders prefer the cosmetics of  

in fairing antennas, however it should  be noted that noTHIng  

works as well as the factory antenna. If fM is an important part of 

your riding  experience, we strongly advise against the use of  

any in fairing type antenna!

Содержание rev 225-RM

















Отзывы: