Thank-you for choosing the Hogtunes Model 692 XL Lid-RM kit for 2014+
“Rushmore” touring model bikes! Since positive word of mouth is the best way
to grow our business, we want your new kit to work as well as it was designed
to. If you have any questions or concerns, we are here to help. Email
[email protected], or call us during regular business hours at
608-554-7631 (USA) or 705-719-6361 (Canada). If you still need help, please
consider a professional installation by your motorcycle dealer.
Undo the 4 screws that hold the speakers in and put the speakers and silicone
gaskets aside. Remove the small Phillips screw at the front of each lid and
release the grills from the lids. The lids are now ready for paint.
Remove the saddlebag from the bike, and put on a stable working surface. For
obvious reasons, blankets etc. on your work surface will help protect the paint.
The white circle in Fig 1.1 above is where a 3/4” (19mm) hole will be drilled. This
hole is where the supplied Hogtunes rubber grommet will go to allow the lids
speaker wire to pass from the saddlebag. We strongly suggest putting masking
tape over the painted area to be drilled. We also suggest starting with a small
bit, and gradually working your way up to the 3/4” (19mm) hole. Drilling the hole
with the lid still on is recommended!
The supplied grommet in Fig 1.2 is “split” to make the install much easier once
the wire is in the bag. The white circle in the picture shows a “plug” that can
easily be removed. If the only wire you have going into your saddlebag is the
speaker wire, leave the plug in place. If you have a second wire for such things as
lighting etc., removing the plug from the grommet will allow the second wire to
also pass without having to drill additional holes in your saddlebag.
Fig 1.1
Fig 1.2
Important Notes:
1)The speakers in this kit are 2 ohms (2Ω) and require an amplifier
capable of reliably playing this electrical load.
2)We strive to make the parts perfect, but things can happen.
Please inspect the parts carefully BEFORE PAINT
Warranty Information:
Hogtunes XL Series speakers are warranted for a period of 5 years to the
original purchaser. Proof of purchase is required for all warranty claims.
Warranty claims are handled directly with Hogtunes. Products found to be
defective during the warranty period will be replaced (with a product
deemed to be equivalent) at Hogtunes sole discretion.
What Is Not Covered:
1) Any expense related to the removal or re-installation of Hogtunes products.
2) Repairs to these products performed by anyone other than Hogtunes.
3) Subsequent damage to any other components.
4) Any product purchased from a non-authorized Hogtunes dealer.
5) Damage to Hogtunes products due to an accident or collision.
6) Paint applied to any part, for any reason.
7) Speaker frames (baskets) that are bent.
8) Speaker cones that are pierced or cut.
9) Damage caused by over tightening, or not using supplied fasteners.
10) Damage from use of Thread lock type materials of any kind.
Hogtunes #692-XL Speakers
Power Handling:
200 Watts
Frequency Response: 30hz-25Khz
Sensitivity : 96 db 1watt/1meter
Nominal Impedance: 2.0 Ohms
7
IMPORTANT: In the event of a warranty claim, please fill
out the form in the Warranty section of our website
www.hogtunes.com. Valid claims will have a Return
Authorization Number (RA#) generated which MUST appear
on the outside of the box when it arrives to our offices.
Goods Arriving Without An RA# Will Be Refused!
