Hogtunes 5X7REV/RG, Руководство по установке

Страница: 4 / 12

Step #3: Unplug the factory wires at each speaker. Remove the 3 torx head screws
and “speed nut” that hold the stock grill/speaker in place and remove
from the bike. Put the factory grills/speakers, and factory torx head
screws aside. Separate the 5x7 from their grills. Locate the “baggie” in
your kit with 6 smaller Phillips head screws. Using these supplied Phillips
Using these supplied Phillips
head screws (only) head screws (only) and the stock “speed nut”, install each 5x7 grill to the
bike.
HOGTUNES accepts no responsibility for inner fairing HOGTUNES accepts no responsibility for inner fairing
damage if factory torx head screws are used! damage if factory torx head screws are used! Install the new
speakers to the grills noting that the speakers must be oriented so the wire
connectors are closest to the radio.
AMPLIFIER WIRE COLOR CODES
4
AMPLIFIER WIRE COLOR CODES
AMPLIFIER WIRING DIAGRAM
Brake-side factory
speaker wire plugs into
green/black on amp
Brown/Black wire plugs
into clutch-side speaker
Blue/Black wire plugs
into Brake side speaker
Optional HF-2RG
Tweeter Pod
Clutch-side factory
speaker wire plugs into
yellow/black on amp
Orange wire goes
to center pin on
cigarette lighter
Power and ground
DIRECT to battery