EN
ATTENTION
This eye- protection is not designed to provide unlimited protection to the eyes. Please read these instructions
carefully before using for the safety sake.
CRITERION
These product meet the requirements of Regulation of the European Parliament and the Council UE No. 2016/425 of
9th March 2016 on personal protective equipment and repealing Council Directive 2001/95/EC, and satisfies the
requirements of the following standard: EN 166:2001.
NORMALIZATION
The corresponding signs can be found on the frame, and the meanings are as following.
Marking on the frame: H 166 FT CE(explanation: H = manufacturer code, 166 = number of the testing standard, FT
= low energy impakt at extremes of temperature (45m/s)).
Marking on the lens: H 1 FT CE (explanation: H = manufacturer code, 1 = optical class, FT = low energy impakt at
extremes of temperature (45m/s)).
TECHNICAL CHARACTERISTICS
1. Category
II
PPE.
2. Class F impact protection.
3. Heat resistance up to 55
°C
, low temperature -5
°C
.
4. Class 1 optical quality.
5. Made of Polycarbonate, polyvinyl chloride.
DECLARATION OF THE MATERIALS
The material of the eye-protection, which is directly in contact with skin, will not do any harm to the skin. But to those
who are easily allergic, there might be allergic reactions.
MAINTENANCE
When you don’t use the eye-protection, we suggest you put it into a clean bag or a clean and dry glasses box.
INSTRUCTION FOR USE
The eye-protection can protect the eyes from the danger of mechanical collision caused by small flying particles.
Please leave the workplace immediately if you feel dizzy or allergic caused the damage of the eye-protection.
If protection against high speed particles at extremes of temperature is required then the selected eye-protector
should be marked with the letter T immediately after the impact letter.
If the impact letter is not followed by the letter T then the eye protector shall only be used against high speed
particles at room temperature.
No spare parts available.
We recommend a use of the goggle for a period of 2 years. The duration of use depends on various factors such as
use, cleaning storage and maintenance. Frequently inspections and replacement if it is damaged are recommended.
CLEANING AND DISINFECTION
A better way to maintain the eye-protection:
1. Don’t use abrasive materials. Use warns suds and soft cloth to wash and clean.
2. Use alcohol to disinfect the eye-protection parts which are directly in contact with the skin.
APPLICATION
The eye-protection can protect the eyes from the danger of mechanical collision caused by high-speed particles.
SERVICE LIFE
Please inspect the eye-protection frequently. Upon the discovery of stiffened or rigid framework or damaged lens,
please replace it immediately.
WARNING
The product can only protect the eyes from collision of a moderate degree, but not supposed to be un-breaking.
Don’t modify the protector of the product.
Please replace the lens upon the damage because damaged lens could influence the eyesight and the protection
effect.
The material which is in direct contact with the skin may cause allergic reaction to some people.
Please confirm with the supervisor whether the eye-protection can provide sufficient protection according the
working condition and refer to the European standards.
The glasses study criterion approve that even with the eye-protection the flying sparkle may also do damage to
the wearer.
If the symbol F is not common to both the ocular and the frame then it is the lower level which shall be assigned
to the complete eye-protector.
Eye-protectors against high speed particles worn over standard ophthalmic spectacles may transmit impacts,
thus creating a hazard to the wearer.
Employees and students shall make a visual inspection of their protector prior to each use. Protectors which exhibit
broken parts, distortion, or scratches on the lens, are unsuitable for use and shall not be worn. Eye and face
protectors that have been subject to an impact shall not be used and shall be discarded and replaced.
DIFFERENT LEVELS OF RISKS
Failure to comply with the indicated mechanical strength (insufficient protection) – always check that your given
the proper protection, in uncertainty check with the health and safety representative.
Exceeding the service life (insufficient protection) – check the eye-protector before each use, for damage and
life-time.
Using an eye-protector without filtering action against optical radiation (damage to the eyes) – check before each
use, that the eye-protector has the necessary scale number, in case of uncertainty check with the health and
safety representative, otherwise the protection can not be guaranteed.
Using the product against splashes (insufficient protection) – always check that your given the proper protection,
in uncertainty check with the health and safety representative.
Using the product against large dust particles (injury, accident) – the eye protection device must only be used for
the work described in the instructions for use. Any deviation from the instructions may cause injury or accidents.
Use of damaged products (insufficient protection) – check the eye-protector before each use, for damage and
life-time.
Improper use of the eye-protector (injury, accident) – the eye protection device must only be used for the work
described in the instructions for use. Any deviation from the instructions may cause injury or accidents.
CERTIFICATE
The address of the notified body is the following:
DIN CERTCO Gesellschaft fuer Konformitaetsbewertung mbH
Alboinstrasse 56
12103 Berlin
Notified body number 0196
Adres producenta:
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21
05-800 Pruszków, Poland
Update released 28.01.2021
