HOW TO USE
Turn on the switch. The switch is located as the picture shows. Turn on the switch, the lamp will start to work automatically (the product has a light
sensor built-in to enable the lamp to turn off light & charge during the day and turn on the light during the night automatically).
INSTALLATION
Please pick a location where the product can have adequeate amount of sunlight. Two ways of installation: Spike for ground (img1) and use screws
to mount onto walls (img2).
1.
2.
ADJUSTMENT
The lamp is flexible in adjusting the angle of light spot and the solar panel. The lamp lightening projector can be adjusted by 120 degrees.
BATTERY REPLACEMENT
The performance of the battery may decrease over time (usually about 1-2 years), please replace the battery as picture.
Mode 1: Dim light is activated by pressing the on/off button one time
Mode 2: Bright light is activated by pressing the button a second time
To turn the light off press the button a third time
