The remote controller restores the factory setting: it means that the remote controller will be restored to the factory’s unique code value.
Step
Operation
Instructions
1
Long press “mode “ for 20 seconds
The remote indicator light dim down and
flashes continuously until the 20th second and
then back to 100% light. Means this step is
finished.
2
Press the “OFF” to confirm, the remote
indicator light flashes 3 times
Restore factory settings successfully.
ACCESSORIES
INSTALLATION INSTRUCTIONS
Remote control rack
1pc
Foam spunge glue
1pc
M4 double headed
self-tapping screw
1pc
Expansion tube
1pc
There are two different installation methods for the remote control rack, customers can choose
to install according to the different situations.
The first installation method: free drilling installation (for flat no ash surface)
1.
First, tear off the protective film for one side of 3M tape, stick it to the back of the remote control rack;
2.
Tear off the protective film for other side of 3M tape, and stick the remote control rack on the place where you want to stick the remote
control rack.
3.
Hang the remote control on the rack after installation
