Hofmann Megaplan M420, Руководство по эксплуатации и обслуживанию

Страница: 11 / 36

9
ENGLISH
Use and maintenance manual
7. Position the wheel on the terminal with the inner part facing the balancer.
8. Firmly attach the wheel to the balancer shaft using the lock nut. In the pneumatic version, use the
specific collar provided. For operation of the spindle with pneumatic locking (constant thrust air
spring) connect the wheel balancer to the compressed air mains. The connection fitting is located
at the back of the machine. At least 7 kg/cm
2
(~ 0.7 MPa; ~7 bar; ~105 psi) pressure is needed for
correct operation of the release device.
9. In the pneumatic version, the pedal allows fastening/releasing the wheel on the adapter using the collar.
10. At this point, you can read the tyre measurements and perform balancing.
11. To perform the spin, lower the splash guard, when fitted and, if necessary and available, press the START
button.
12. The wheel is automatically locked when reaching the correct angular position for weight application
on the inside and outside, turning it slowly by hand. To unlock the wheel, turn it hard to move it from the correct
correction position. If the unbalance is within tolerance, the wheel is locked automatically.
It is prohibited to touch any part of the machine during the balancing cycle.
Starting