I 0667
-
10
10
GB
5.4 - RESULT OF MEASUREMENT
After performing a balancing spin, the amounts of unbalance are shown on the digital readouts.
The LED ‘s, number 3 and 4, indicate the correct angular wheel position to mount the counterweights (12 o’clock posi-
tion). If the unbalance is less than the threshold selected,
0
is displayed instead of the unbalance; with
it is possible to read the values below the threshold chosen gram by gram.
To enable automatic program and data acquisition for a new wheel to be balanced, press
5.5 - RECALCULATION OF THE UNBALANCE
Press
after new setting of the measurement.
5.6 - DOUBLE OPERATOR PROGRAM
This program allows memorizing the dimensions of two types of wheels. Thus two operators can work simultaneously
on two differents cars using the same balancing machine. The system memorizes two programs with different preset
dimensions.
1 - Press
for more than 3 seconds to select the operator (1 or 2). The current USER is displayed by brie
fl
y
pressing the button
.
2 - Enter the dimensions (see
AUTOSELECT
)
3 - Press
to carry out the balancing as usual and to automatically store the program to the currently selected
user.
Press
for more than 3 seconds to select program 1 or 2 for subsequent balancing operations without setting the
dimensions again.
Inside correction
Outside correction
5.3 - OTHER ALU MODES
Put in the wheel data as for steel rims described in
AUTO SELECT FOR STEEL RIMS
.
Make the measuring spin.
Press
as many times as the LEDs light up for the desired correction method.
Fix the weights at the indicated positions.
Make a control spin.
To balance more tyres of the same type and dimensions the machine automatically stores the current wheel data.
Содержание EASY
Страница 2: ...I 0667 2 GB ...
