Hoffer Flow Controls HRT1, Руководство пользователя

Страница: 38 / 67

HART Communications
30
HP-313 HRT1
# COMMAND DESCRIPTION
141 Write Linearization
K-Factor
Write the K-Factor values for the
linearization table points.
142 Read Pulse Information Read Pulse Scale and Pulse
Frequency information.
143 Write Pulse Scale Set the Pulse Scale to 1, 10, 100
or OFF.
144 Write Pulse Frequency Set the frequency in Hz. of the
pulse output burst to 1, 2, 4 or 8.
145 Pulse Output Control Stop 1 Hz Pulse Output Test.
146 Pulse Output Test Start 1Hz Pulse Output Test.
147 Read Alarm Info Read Function and Level for
Alarm 1 and 2.
148 Write Alarm Function Define the function of the Alarm
Output as Rate or Total.
149 Write Alarm Level Write the value at which an
alarm condition is indicated.
150 Alarm Release Release the Alarm Output test.
151 Alarm Test Activate Alarm Output.
152 Read Tag Read Tag Number.
153 Write Tag Write Tag Number. 0 to
99999999.
154 Read Sample Time Read Sample Time.
155 Write Sample Time Write Sample Time. Valid
entries 1-80.
156 Write Password Write 4-digit password. 9999 is
max value.
157 Read Lock Status Read Lock Status. Password is
required when unit is locked.
158 Write Lock Unit Lock the unit and enable
password protection.
159 Read Current Mode Read mode for analog output
current (4mA, 12mA, 20mA,
Follows Rate).