HOFFEN SB-8234, Инструкция по эксплуатации

Страница: 18 / 22

3
18
Before use, make sure that your hair is clean and well-brushed.
1. Connect the device to an outlet with power characteristics compliant with the
requirements specified on the rating plate of the device or in this manual. The
display will show OFF, denoting a device that is switched off but connected to
a power source.
2. Turn the device on by pressing the on/off switch and holding it for approx. 3
seconds. The display should show a temperature of 180°C, then the device
will automatically start heating up 180°C.
3. Use + or – buttons to increase or decrease the temperature. Available setting
range: 80°C – 200°C. By pressing the + or – button, you increase/decrease
the temperature by 5°C.
4. The temperature of the device may be changed at any time, as required by
the user.
5. The device reacts to any change in the temperature setting, updating the
display to show the current temperature.
6. After reaching the required temperature, use the brush to straighten your
hair by brushing it from the root to the tips, in the same manner as with a
traditional brush or comb.
7. After use, turn the device off by pressing and holding the on/off switch for
approx. 3 seconds.
Caution! If the device is not used for an hour, despite being plugged in and turned on,
it will switch off automatically after 60 minutes. The display will show OFF.
8. The display will show OFF, which means that the device is switched off.
Unplug the device.
9. Wait for the device to cool down, then store it in accordance with the
instructions included in section 10 Storage and transport.
Caution: Turn the device off and leave it to cool down before
cleaning to avoid electric shock or burn.
Caution: Do not use any strong chemical, alkaline, abrasive or
disinfecting agents for cleaning the device as they could damage
its surface.
8.1 General principles
Correct and regular cleaning will improve the safety and extend the lifespan of
the product.
7. USE
8. CLEANING