HOFFEN POJM180275, Инструкция по эксплуатации

Страница: 25 / 30

3
25
7.2 Placing/removing the microfiber cloth
1. Make sure that the appliance is unplugged from the power supply and is not
being charged.
2. Place the microfiber cloth on the Velcro, as shown in the figure below.
3. To remove the microfiber cloth, hold one end of the cloth and pull.
Placing the overlay Removing the overlay
7.3 Using the washer
1. Holding the appliance by the grip, press the washer nozzle button, as shown
in the figure below, and spray the surface you wish to clean. Make sure that
the washer nozzle is directed towards the surface to be cleaned, such as a
window.
Washer nozzle button
2. Use the microfiber cloth to wipe dirt from the cleaning surface. For easier
cleaning, hold the washer by the part of the casing where the water tank is
located.
3. After cleaning with the microfiber cloth, you can start washing the surface
with the rubber blade. Make sure that the blade is securely affixed to the
blade holder. Hold the washer grip and use the on/off switch to turn on the
appliance – the battery charge LED will light up in blue.
4. With the rubber blade directed towards the cleaning surface, move the blade
up and down until the surface is dry and all the dirt and smudges are removed.
5. After cleaning, use the on/off switch to turn the appliance off – the battery
charge LED will go out.