HOFFEN POJM170352, Инструкция по эксплуатации

Страница: 22 / 26

3
22
7.4 SPRAY FUNCTION
This function may be used to eliminate the most stubborn wrinkles.
1. Make sure there is enough water in the water reservoir. If not, go to the FILLING
THE WATER RESERVOIR section.
2. In order to moisten the fabric that is being ironed, press the spray button several
times. Water will come out of the spray nozzle at the front of the iron.
7.5.STEAM BURST FUNCTION
The steam burst function is useful for removing creases on hanging clothes, curtains
etc. This function may also be used during dry ironing.
CAUTION! Never direct the steam at people!
1. 1. Make sure there is enough water in the water reservoir. If not, go to the
FILLING THE WATER RESERVOIR section.
2. Place the iron upright.
3. The temperature control should be set at least to
WOOL .
4. Plug the cord into an earthed power supply socket.
5. The light signaling of the iron heating process will turn on. It will go out when
the iron has reached the desired temperature.
6. Press the steam burst button and direct the soleplate at the fabric.
7.6 STEAM IRONING
1. Make sure there is enough water in the water reservoir. If not, go to the FILLING
THE WATER RESERVOIR section.
2. Place the iron upright.
3. The temperature control should be set at least to
WOOL.
4. Set the steam adjustment knob to “ 1 ” or “ 2 ”.
5. Plug the cord into an earthed power supply socket.
6. The light signaling of the iron heating process will turn on. It will go out when
the iron has reached the desired temperature.
7. The iron will give off steam only when in a horizontal position.
8. After you have finished steam ironing, turn the steam adjustment knob to “ 0 ”
(no steam).