HOFFEN NUL-9282, Инструкция по эксплуатации

Страница: 24 / 30

24
slide your hand under the lamp.
Caution! The nail UV LED lamp works only when the USB
cable is connected to a power source.
4. Slide nails with hybrid enamel under the lamp so that
its LEDs cast light directly on the nails. Then turn on
device by selecting one of the time settings options:
• Press the on/off switch once – 30 seconds
• Press the on/off switch again – 60 seconds
• If you slide your hand under the lamp, the device will
switch on in the default mode — 90 seconds (+/- 3
seconds).
5. When the selected time option elapses, the lamp will
turn off automatically.
Caution! The lamp turns off itself after the lapse of the
selected time, 30 or 60 seconds. If the time is too long,
you may turn off the lamp by pressing the on/off switch
again, or by sliding the hand away from the device when it
is operating in the 90-second default mode.
6. Once you have finished using the device, disconnect
the USB cable from the device and the power source.