HOFFEN HB-9292, Инструкция по эксплуатации

Страница: 25 / 32

3
25
7.3 Removal / installation of the blending attachment with stainless steel blades
• When using the appliance directly when cooking soups, sauces or other
dishes, remove the pan/pot from the cooker so that the blending attachment
is not overheated.
1. Connect the appliance to a 220-240 V~ 50/60 Hz alternating current mains.
2. Place the products for blending in a 600ml container. The container should
not be filled higher than 3/4 of its height.
3. To increase the rotation speed, turn the appliance off, then turn the rotation
speed control ring to the desired position. 1 means the lowest speed, 5 means
the highest speed.
4. Turn the appliance on.
5.
After you have finished blending, release the SLOW or TURBO button to turn
the hand blender off.
6. Wash blending attachment with stainless steel blades and container 600ml.
Attention! The rotation speed control cannot be used if the appliance is
operated in the TURBO mode.
Caution!
The stainless steel blades are very sharp. Handle them very
carefully.
The maximum operating time of the appliance within a single cycle cannot
exceed 1 minute. When 1 minute elapse, turn the appliance off and wait 1
minutes before using it again.
Disconnect the appliance from the power source before you approach parts
that move during appliance operation.
If the blade gets jammed during appliance operation, turn the appliance off
immediately. Disconnect the appliance from the power source and remove
the cause of the jam. If you operate the appliance with the blades jammed,
you could damage the appliance.
The attachment needs to be removed only for cleaning.