HOFFEN D-80020, Инструкция по эксплуатации

Страница: 22 / 30

3
22
7.1 General information
1. Pre-filter – captures dust particles and allergens.
2. Activated carbon filter – absorbs formaldehyde, benzene and other harmful
gases.
3. HEPA filter – traps dust, smoke, pollen and other allergens.
4. UV-C LIGHT – destroys microorganisms such as germs, viruses, bacteria
and fungi (including mould toxins)
5. ION - negative ions improve air quality by precipitating allergens, mites and
pollen. Negative ionisation of the air improves our general well-being.
6. For the recommended area of 15 m2 the air will be cleaned after approx. 26
minutes of maximum continuous operation.
In larger rooms, the time required to clean the air will be longer.
Ensure tightness of the room to maximize the efficiency of the unit, eg close
windows and doors.
7.2 Use
1. Make sure that the device has the 3-in-1 filter installed.
2. Place the device on a flat and stable surface.
3. Check whether the installed filter is covered by a protective plastic film. If so,
remove the film and reinstall the filter in the device.
Caution! Make sure that the filter has been installed correctly and the cover has
been properly closed. Otherwise, the device will not turn on.
4. Connect the device to a mains outlet. Make sure that its parameters match
those specified in this user manual. The LEDs will light up for a moment.
5. Turn on the device by pressing the button.
6. Select the operating mode and time.
7. After use, turn the device off by pressing the
button. Then unplug the
device from the mains outlet.
1. Switching the device on/off ( ON/OFF ). Filter replacement LED ( FILTER RESET ).
2. Fan speed: I – low, II – medium, III – high
7. USE
1 2 3
4