HOFFEN B80560, Инструкция по эксплуатации

Страница: 25 / 30

3
9
Warning! Pulse operation requires that you hold the dial.
For ingredients that require brief mixing, use the pulse mode ( “P” ). It is the optimal setting
for liquids that containing, for example, nuts. To use the pulse mode with the highest
possible speed setting, set the speed control to M, then hold down the pulse mode dial.
After releasing the dial, the device will turn off.
Caution!
Never exceed the maximum capacity of 2,000 ml as indicated on the blender jar.
Certain mixtures increase their volume during blending.
Caution!
Ingredients may stick to the walls of the blender jar while the appliance is being
operated. If this happens, stop the appliance by turning the speed control to the OFF
position, disconnect the device from the mains outlet, remove the lid and use a plastic
or wooden spatula to push the sticky ingredients down.
Caution!
If the blades become jammed during operation, immediately turn the speed control to
the 0FF position and disconnect the device from the mains outlet. Then remove the lid
and use a plastic or wooden spatula to remove the cause of the blockage. Continued
operation of the blender when its blades are jammed can damage the appliance.
Caution!
The blades are sharp. Be careful when handling them.
Troubleshooting
Problem Solution
Control buttons are off and the
appliance does not work.
Place the jar on the blender base and
connect the power cord to a mains outlet.
• Press the jar again to turn the safety
switch on once more.
Control buttons light up but the
appliance does not work.
• Disconnect the power cord from a mains
outlet.
• Make sure that the blender jar correctly
activates the safety switch on the blender
base
The appliance stops after prolonged
blending.
• The motor has been protected from
damage by its overload stoppage
mechanism.
• Unplug the power cord and allow the
blender to cool down for 30 minutes
before reconnecting it.